Lockable and Tamperproof Notice Boards: A UK Buyer's Guide

November 19, 2026
Published on  Updated on  

Quick answer: A lockable notice board has a glazed, key-locked door so only authorised staff can change what is displayed. A tamperproof board adds a secure frame that is meant to resist being opened or removed without the key. Choose one wherever notices must stay put and stay correct, for example important notices, public corridors, reception areas and outdoor walls. Look for a sturdy frame, a shatter-resistant glazed door, a quality lock with spare keys, and, if the board sits in a corridor or escape route, an EN 13501-1 classification report for its surface.

What "lockable" and "tamperproof" mean

The two terms get used together, but they solve slightly different problems.

  • Lockable means the display is behind a glazed door that opens only with a key. People can read the notices but cannot change them.
  • Tamperproof means the whole unit resists interference. The frame has no exposed fixings to unscrew, the door cannot be levered open, and the board cannot be lifted off the wall without tools and access.

Most secure boards are both. The lock protects the content, the frame protects the board. Tamperproof is a trade description rather than a rating defined in a standard, so ask a supplier exactly what it means for the board you are considering.

When you need a secure notice board

You need one any time the cost of a notice being removed, defaced or replaced is higher than the cost of the board. Common cases:

  • Important notices such as fire procedures and any notices your organisation has to keep on display, which should stay in place and legible.
  • Public or semi-public corridors in schools, colleges, hospitals and council buildings, where anyone can walk past.
  • Outdoor and entrance positions exposed to weather and passers-by.
  • High-turnover areas like reception, where an out-of-date or doctored notice reflects badly on the organisation.

How to choose: the five things that matter

1. Frame material

Anodised aluminium is a common choice because it is light and resists corrosion. Ask what the frame is made of and how thick it is, especially for anything that needs to last or sit outdoors.

2. Door and glazing

Look for a shatter-resistant glazed door, usually polycarbonate or safety acrylic rather than glass, so a knock does not leave broken shards in a public space. The door should seal against the frame to keep dust and damp out.

3. The lock

Ask how many keys come with the board. For sites with several boards, ask whether they can be keyed alike so one key opens them all, or keyed to differ for tighter control. Spare keys save a locksmith call when one goes missing.

4. Surface

Felt and cork both take pins well. Magnetic and dry-wipe surfaces suit boards that change daily. If the board needs a fire classification, ask for the supplier's test report for that exact surface.

5. Fire rating

If the board sits in a corridor, stairwell or escape route, fire performance matters, and whether a board counts as a wall lining there is for your building control body or fire risk assessor to decide. Current guidance in England (Approved Document B, amended March 2025) expresses wall and ceiling lining performance in the European classes of BS EN 13501-1, and BS 476-7 was withdrawn in March 2025, so ask for the product's EN 13501-1 classification report. The classification applies to the product as tested, so check what was tested, including the frame and backing. There is more in our guide to fire-rated notice boards.

Indoor vs outdoor secure boards

Typical feature Indoor lockable Outdoor lockable
Frame Anodised aluminium Aluminium with weather seal
Door seal Dust seal Full-perimeter rubber gasket
Drainage Not needed Water-drainage channel in base
Glazing Shatter-resistant acrylic UV-stable, shatter-resistant
Mounting Wall Wall or post mounted

For exposed positions, see our outdoor notice board guide and the weatherproof showcase range.

Supply and installation

We supply notice boards to schools, universities and offices across the UK. Our team can help you match a board to its position and arrange installation, so it is hung level and fixed securely.

Browse lockable and tamperproof notice boards →

Frequently asked questions

What is the difference between a lockable and a tamperproof notice board?

A lockable notice board has a glazed door that opens only with a key, so the content cannot be changed. A tamperproof board is meant to resist the unit itself being opened or removed, for example with concealed fixings and a secure frame. Most secure boards are both.

Are lockable notice boards suitable for outdoors?

Yes, if you choose an external model. Outdoor lockable boards add a full-perimeter rubber gasket, a water-drainage channel in the frame base and UV-stable glazing, so notices stay dry and legible. Indoor boards lack these and will let in damp if used outside.

Do notice boards in corridors need to be fire-rated?

The rating that applies is set by the building's fire strategy and fire risk assessment, so check that document or ask your fire consultant. Current guidance in England (Approved Document B, amended March 2025) expresses wall and ceiling lining performance in the European classes of BS EN 13501-1, and BS 476-7 was withdrawn in March 2025, so ask for the product's EN 13501-1 classification report.

How many keys come with a lockable notice board?

It depends on the board, so ask before you order. If you are fitting several boards, you can often ask for them to be keyed alike so one key opens them all, or keyed to differ for tighter access control.

What surface should I choose for a secure notice board?

Felt and cork both take pins well, and magnetic or dry-wipe suits a display that changes daily rather than being pinned. If the board sits in a corridor, ask the supplier for the EN 13501-1 classification report for that surface.

Not sure which board suits your site? Talk to our team and we will help you spec it and arrange installation.

Published on  Updated on